Slider
Slider

Ring Termination by Servo

US-3020SRT

 

US-3020SRT Servo Ultrasonic Ring Termination full machine picture

Servo Ring Termination Video's Playlist

All videos can be accessed by clicking the top left corner

Welding Capabilities

Cross Section Area

Wire/Material Type

Up to 28mm²

Copper (Cu), Aluminum (Al)

Product Specifications

Frequency

Ultrasonic Power Output

Power Supply

Pneumatic Pressure 

Weld Force

Weldhead 

Controller Cabinet

Visual Display

Additional Options

20 kHz nominal

3.0 kW maximum

220-240 VAC single phase; 16 Amp max, Nema 6-20r outlet

6.5 bars / 94 psi dry, clean air

~3,000 Newton maximum

250 pounds (113 kg)
H - 16" (406.4 mm)
W - 23" (584.2 mm)
L - 30" (762 mm)

75 pounds (34 kg)
H - 16" (406.4 mm)
W - 9" (228.6 mm)
L - 20" (508 mm)

17" LCD display with mouse


Barcode Scanner
Touchscreen Monitor

Industry Leading Missing Wire Detection

  • Capability to detect one missing wire at 0.35mm² from a bundle, or below 3% of total cross section area.
  • Retracted wire from weld area detection, or added insulation into weld area detection within 3% of total cross section area.

Dynamic Force and Amplitude Control™

With Multi-Step Welding

  • Capability of over 20 weld steps with unique force and amplitude parameters.
  • Ability to change and adjust force and amplitude during the weld cycle to optimize welding parameters for each specific wire application
  • Energy and frequency remain constant

Load Cell Force Feedback

Under 10µm Resolution

  • Consistent measurement and ultrasonic output produce high cPk values
  • Measurement of pre-weld and post-weld height
  • Cross section area measurement and calculation for additional quality control

Welding Capabilities

Cross Section Area   up to 28mm²

        Wire/Material Type  Copper, Aluminum

Product Specifications

         Frequency    20KHz nominal

      Power Output     3.0kW maximum 

Power Supply     220-240 VAC

 Pressure     6.5 bars 

          Weld Force     ~3,000 Newtons

Industry Leading Missing Wire Detection

  • Capability to detect one missing wire at 0.35mm² from a bundle, or below 3% of total cross section area.
  • Retracted wire from weld area detection, or added insulation into weld area detection within 3% of total cross section area.

Dynamic Force and Amplitude Control™

With Multi-Step Welding

  • Capability of over 20 weld steps with unique force and amplitude parameters.
  • Ability to change and adjust force and amplitude during the weld cycle to optimize welding parameters for each specific wire application
  • Energy and frequency remain constant

Interchangeable Nest

US-3020SRT Interchangeable nest's

Four-sided Horn

US-3020SRT four-sided horn

Wire Strand Gatherer

US-3020SRT Wire Gatherer

Sample Gallery

Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Sample 6 Sample 7 Sample 8 Sample 9 Sample 10

Sample Gallery

L logo

Y logo

E logo

p logo

2710 Sawbury Blvd

Columbus, Ohio 43235 USA    

+1-614-792-3117

Minority Business Enterprise logo footer

           Contact Us               2710 Sawbury Blvd

                        Our Team           Columbus, Ohio 43235 USA

 Ultrasonic FAQ              +1-614-792-3117

Downloads Page                                       

Minority Business Enterprise. Made in Columbus, Ohio, USA

Copyright © 2018 TECH-SONIC, Inc. All Rights reserved.